Packaging Information
Profile Series Sizes
Note:
Concrete masonry veneer units with a length greater than 410mm (16.14”) may not be defined as unit masonry by the respective standard. When considering non-standard dimensional units, structural performance of the block unit and of the masonry construction should be reviewed and verified.
Concrete masonry veneer units that are 90mm (3.5”) or less in height and produced as a single size will require more frequent control (movement) joint spacing. Refer to the NCMA TEK 10 series on movement control.
To ensure proper construction, please refer to your local Building Code(s), Standards and Industry Best Practices.
Brampton Brick Limited is not design responsible.